Skip to content

ISO 9001:2015 certified · 9:30 am – 6 pm IST

+91 80702 23300

Get a quote

Not listed?

Ask an engineer

Esc or click outside to close

Seal failed?

Three ways to reach an engineer now. Reach an engineer now. In working hours we call back in [15 min].

Call now · +91 80702 23300 WhatsApp a photo of the old seal

Or we call you

In working hours, 9:30 am – 6 pm IST, an engineer calls within [15 min]. Your details are used only for this call. Working hours: 9:30 am – 6 pm IST. Your details are used only for this call.

Datasheet · ISPL 2408
indoseals.com/products/ispl-2408/

Pump seals

ISPL 2408 Double Mechanical Seal

ISPL 2408 is two seals in one stuffing box, with a clean barrier liquid at higher pressure between them to carry heat away. It is for volatile, toxic, slurry and abrasive duty.

Type
Double, multi-spring
Rotation
Bi-directional
Shaft size
25–200 mm0.98–7.87 in
Pressure
up to 10 kg/cm²≤ 10 kg/cm²up to 142 psi≤ 142 psi
Temperature
up to 150 °C≤ 150 °Cup to 302 °F≤ 302 °F
Balance
Unbalanced or balanced pairs

An engineer replies within [1 working hour]

Datasheet (PDF, 748.9 KB)

Datasheet

Specifications

Units
Operating limits
ParameterLimitUnitCopy
Shaft diameter 25–2000.98–7.87 mmin mmin
Pressure up to 10≤ 10up to 142≤ 142 kg/cm²psi kg/cm²psi
Temperature up to 150≤ 150up to 302≤ 302 °C°F °C°F
Surface speed up to [0.0]≤ [0.0] m/sft/s m/sft/s
Rotation Bi-directional –
Standard
[Standard followed]
Arrangement
Double seal: back-to-back, face-to-face or tandem
Versions
Back-to-back (2408 A) · face-to-face · tandem

Data as of [last updated]

Materials of construction
PartOptionsCopy
1 · Seal faces [Face combinations]
2 · Springs [Grade]
3 · Secondary seals [Elastomer and PTFE options][Elastomer options]
4 · Gland plate [Grade]
5 · Sleeve and other metal partsSleeve, metal parts [Grades]
Section A–A · Seal faces highlighted [Placeholder: ISPL 2408 section, to be redrawn from its GA drawing. ISPL 2401 shown.]

Applications

Where it's used

Equipment

  • Pumps for volatile and toxic fluids
  • Slurry and abrasive pumps

Pumps for volatile and toxic fluids and slurry and abrasive pumps.

Design

Design features

  1. Two seals

    Two seals inside one stuffing box.

  2. Barrier liquid

    Clean liquid at higher pressure cools the faces.

  3. Your combination

    Unbalanced or balanced on either side.

  4. Easy to replace

    Easy to install and replace.

Files

Downloads

Datasheets open without a form. Drawings are sent on request.

FAQ

Questions buyers ask

Which combinations can you supply?

Unbalanced/unbalanced, balanced/balanced or unbalanced/balanced, as the duty needs.

What do you need from me to quote?

Shaft size, speed, temperature, pressure and the fluid. A photo of the old seal or its nameplate helps.

How long does delivery take?

After order confirmation: 2 days from stock, 2 weeks for a new seal.

Step 1 of 3 · What you need

Get a quote for ISPL 2408

You're asking about ISPL 2408 Change product

What do you need?
How urgent?

Three short steps. Your request is saved after step 2.An engineer replies within [1 working hour]. Your request is saved after step 2.